- OR -

Dual Titan Exhausts - Stainless

  • Dual Titan Exhausts - Stainless
  • Dual Performance Exhausts - Blackout In Red
  • Dual Exhaust - Brushed
  • Dual Full Exhaust - Brushed
  • Dual Full Exhaust - Black
  • Titan Slip On Exhaust
  • Dual Titan Exhausts - Stainless
  • Dual Titan Exhausts - Stainless
  • Dual Full Exhaust - Black
  • Titan Slip On Exhaust
  • Titan Slip On Exhaust
  • Dual Titan Exhausts - Stainless

Honda® Talon 1000R/X

The HMF™ exhausts for the Honda® Talon 1000 R/X are available as a Dual Full System in the Performance and Titan series and a Slip-On in the Titan series.  All available HMF™ exhausts take advantage of HMF's™ superior engineering to produce unmatched durability, sound, power and torque.  All systems retain the OEM oxygen sensor for optimum drivability.   

Dual Full System - Performance & Titan Series
The 4" aluminum Performance Series picks up 9 hp and 4 ft-lbs of torque while reducing the weight of the entire exhaust system by 10 lbs.  The 5" stainless steel Titan series is available in our QS (quiet) and XL (loud) internal core design, picking up 7.5 horsepower and 3.8 torque  The Titan series reduces the weight of the entire exhaust system by 5 lbs.  The Performance and Titan-XL (Loud system) Full systems are 6 dB louder than stock at idle, while the Titan-QS (Quiet system) is 4 dB louder than stock at idle.  The dual center exit design protects the entire system within the frame of the vehicle and produces an amazing sound and look.

Slip On System Titan Series
The 5" stainless steel Titan Slip On System retains a similar layout as the stock exhaust while still retaining the signature HMF™ design.  The Slip On System picks up 3 hp and 3 ft-lbs of torque and reduces the weight of the exhaust system by 9 lbs.  The Titan-XL (Loud system) Slip On system is 5 dB louder than stock at idle, and the Titan-QS (Quiet system) is only 2 dB above stock. 

For even more information visit the Honda Talon Exhaust Guide

Fitment:
(19-23) Honda® Talon 1000 R/X 
(20-23) Honda® Talon 1000 X-4 

Fuel tuning is required learn more

Fuel Tuning is absolutely required when installing an HMF Exhaust on this machine. Failure to tune the engine can cause excessive damage to the exhaust system and engine, while voiding the warranty on your exhaust and possibly on your machine. (check with local dealer). See the tuning settings below for the proper fuel tuning solution on your machine.

Exhaust Systems

Honda® Talon 1000R/X UTV Accessories

Tuning

Low Speed Fuel

Going down on the number scale will reduce low speed fuel. Going up on the number scale will increase low speed fuel.

Mid Range Fuel

Going down on the number scale will reduce mid range fuel. Going up on the number scale will increase mid range fuel.

High End Fuel

Going down on the number scale will reduce high end fuel. Going up on the number scale will increase high end fuel.

Green Lower Switch Point

Going down on the number scale will turn green mode on earlier. Going up on the number scale will turn green mode on later. These modes typically will not need adjusted from their base setting.

Yellow Lower Switch Point

Going down on the number scale will turn yellow mode on earlier. Going up on the number scale will turn yellow mode on later. These modes typically will not need adjusted from their base setting.

Red Lower Switch Point

Going down on the number scale will turn red mode on earlier. Going up on the number scale will turn red mode on later. These modes typically will not need adjusted from their base setting.

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.