- OR -

Titan-XL Full System - Stainless Steel

  • Titan-XL Full System - Stainless Steel
  • Titan-XL Full System - Stainless Steel
  • Titan-XL Full System - Stainless Steel
  • Titan-XL Full System - Stainless Steel
  • Titan-XL Full System - Stainless Steel
  • Titan-XL Full System Head Pipe
  • Titan-QS Slip On System - Stainless Steel
  • Titan-QS Slip On System w/plastic installed
  • Titan-QS Slip On System - Stainless Steel
  • Titan-QS Slip On System - Stainless Steel
  • Titan-QS Slip On System - Stainless Steel
  • Titan-QS Slip On System - Stainless Steel

Arctic Cat® Wildcat XX

The Wildcat XX exhaust systems are available as a Slip-On and a Full System in the Titan Series.  The harmonics and tone of the 1000cc triple cylinder engine are fully harnessed with the Titan Series exhaust and the Wildcat XX sounds amazing after eliminating the bulky, restrictive stock silencer.

Titan Series
Slip-On System
The single 5” Stainless Steel silencer picks up 4 hp and 3 ft-lbs.  The Titan QS (quiet) is 1-2 db louder than stock and the Titan XL (loud) is 4-5 db louder than stock.  The slip on also shaves off a few pounds compared to the stock silencer.
Full System
The single 5” Stainless Steel silencer and header picks up as much as 8 hp and 5 ft-lbs.  The Titan QS (quiet) is 2 db louder than stock and the Titan XL (loud) is 5-7 db louder than stock.  The full system saves about 4 lbs compared to the stock system. The head pipes have been designed to have an equal length and smoothly connect into a custom merge collector for the best possible exhaust flow and distribution of power.  This head pipe really is a piece of functional art.

Exhaust Fits:  
(2018-2020) Textron / Arctic Cat Wildcat XX, 2020 Tracker XTR1000

Fuel tuning is not typically required learn more

Typically, fuel tuning is not required when installing an HMF Exhaust on this machine. However, other modifications to the machine may require the need for fuel tuning to ensure the machine runs properly, and there is no damage to the exhaust system. See the tuning settings below for possible tuning solutions or Contact Us for more information.

Exhaust Systems

Arctic Cat® Wildcat XX UTV Accessories

Tuning

Stock Air Box Configuration Recommended

Typically, fuel tuning is not required when installing an HMF Exhaust on this machine. However, other modifications to the machine may require the need for fuel tuning to ensure the machine runs properly, and there is no damage to the exhaust system. See the tuning settings below for possible tuning solutions or Contact Us for more information.

Low Speed Fuel

Going down on the number scale will reduce low speed fuel. Going up on the number scale will increase low speed fuel.

Mid Range Fuel

Going down on the number scale will reduce mid range fuel. Going up on the number scale will increase mid range fuel.

High End Fuel

Going down on the number scale will reduce high end fuel. Going up on the number scale will increase high end fuel.

Green Lower Switch Point

Going down on the number scale will turn green mode on earlier. Going up on the number scale will turn green mode on later. These modes typically will not need adjusted from their base setting.

Yellow Lower Switch Point

Going down on the number scale will turn yellow mode on earlier. Going up on the number scale will turn yellow mode on later. These modes typically will not need adjusted from their base setting.

Red Lower Switch Point

Going down on the number scale will turn red mode on earlier. Going up on the number scale will turn red mode on later. These modes typically will not need adjusted from their base setting.

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways
Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.