For Models: RZR Pro XP (2020-2025)
!!! WARNING !!! Before working on your machine, make sure it is parked on a level surface with the transmission in park and/or the parking brake engaged.
1. Remove the following:
2. If the vehicle came with a bumper hoop remove the original front bumper hoop and support brackets. (See Figure #1)
(See Figure #2)
1. Begin by installing the HMF Winch Mount Top Plate using the supplied (2) M10-1.5x25 Hex Bolts (4) 3/8" Flat Washers (2) M10-1.5 Nylock nuts .(See Figure #3)
2. Install the Winch onto HMF Winch Mount Top Plate at this time.(See Figure #4)
3. Loosely secure the HMF Winch Mount Bottom Plate to the vehicle using the supplied (2) M10-1.5x25 (2) 1/4" Aluminum Spacers (2) 3/8" Flat Washers.(See Figure #5)
4. Using supplied (2) M8-1.25x30 Allen Bolts (2) 1/4" FLat Washers (2) M8-1.25 Nylock Nuts install your Fairlead, securing the HMF Winch Top Mount Plate to the HMF Winch Mount Bottom Plate (See Figure #6)
5. Reinstall the factory Outer Fascia Plastics onto the Vehicle using the Factory Torx Hardware.(See Figure #7)
6. Using the remaining (4) Factory Torx bolts install the HMF Front Winch Cover Plate. (See Figure #8)
7. With all components in place make any final adjustments and tighten all hardware.