Can Am Outlander 500/650/800 MAX/XMR Slip-On Spring Mount Installation Instructions For Models: Outlander 800 MAX (2006-2008), Outlander 500 MAX (2007-2008), Outlander 650 MAX (2006-2008)
1. Make sure the machine is on level ground and completely cooled down.
2. Loosen the Stock Clamp or Springs (Depending on the model year) that holds the Silencer and Head Pipe together.
3. Loosen the Silencer Mounting Bolts.
4. Brace the back of the Silencer with one hand, and take the bolts the rest of the way out.
5. Pull back and twist with until the Silencer is removed.
6. CLAMP MODEL: Remove the Stock Gasket off of the Header, you will no longer need it with the HMF Exhaust.
SPRING MODEL(See Figure #1)
1. Slide the HMF Silencer over the Head Pipe.
2. Mount the Silencer with the supplied hardware. Do not tighten yet!
3. Install the Springs using a Spring Puller or a piece of wire and tighten the Mounting Bolts.
4. With most applications, tuning is a necessity.
