Head Light Blocks, Yamaha® Raptor 250 Instructions For Models: Raptor 250 (2008-2013)
1. Unplug and Remove the Stock Headlights.
2. Remove the 2 Stock Grommets and save them. You will reuse these in the large holes of the Block off Plates.
3. Position the Block off Plates in line with the Stock Mounting Holes and slide over the Stock Tabs.
4. Tighten the Button Head Allen Screw.(See Figure #1)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks:
