- OR -

Exhaust Systems Yamaha® Raptor 125

Print Instructions

HMF Racing Full System Exhaust Instructions

For Models: Raptor 125 (2011-2013)

Removal

1. Loosen the Stock Clamp that holds the Stock Silencer and Head Pipe together.

2. Loosen the Silencer Mounting Bolts.

3. Brace the back of the Silencer with one hand and take the bolts the rest of the way out.

4. Pull back and twist until the Silencer is removed.

5. Loosen the Bolts on the Header Port.  Once loosened, suuport the Silencer with one hand.  Remove the Bolts and the Head Pipe.

Installation

1. Be sure the Gasket is placed flush into the Exhaust.(See Figure #1)

Full System Exhaust Instructions - Figure 2

2. Slip the HMF Head Pipe into the Exhaust Port while aligning the Flange with the Bolt Holes. 

3. Slide the T-Bolt Clamp over the end of the HMF Silencer and then slide the Silencer onto the Head Pipe.  Some pushing and twisting may be necessary.

4. Mount the Silencer with the Stock Bolts or the supplied hardware and tighten.

Note:  For the Silencer Mounting Bracket, use the Front Grab Bar Mounting Bolt Hole instead of the Original Silencer Mounting Bolt Hole.(See Figure #2)

Full System Exhaust Instructions - Figure 1

5. Tighten the Header Bolts onto the Flange and T-Bolt Clamp to secure the Silencer to the Head Pipe.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.