- OR -

Exhaust Systems Polaris XPedition

Print Instructions

HMF Racing Inner Fender Guards, Polaris XPedition Instructions

For Models: XPedition (2024-2025)

Installation

1. Remove 3 torx screws shown in the picture.(See Figure #1)

Inner Fender Guards, Polaris XPedition Instructions - Figure 1

2. Using provided hardware (Flange Buttonhead M6x30-T30 torx bolts ) install HMF Fender Guard. (See Figure #2)

Inner Fender Guards, Polaris XPedition Instructions - Figure 2

3. Repeat the process for the other side of the vehicle.

Discussion