- OR -

Exhaust Systems Polaris® Scrambler® XP 850

Print Instructions

HMF Racing HD Front Bumper, Polaris® Scrambler XP 850 Instructions

For Models: Scrambler® XP 850 (2012-2016)

Installation

1. Install the Skid Plate using the supplied (4) M8x25 ButtonHead Bolts, (8) 1/4" Washers and (4) M8 Speed Nuts.  (For the Fairlead application, use the supplied hardware).

2. Use the (2) M8x35 Bolts and (2) 1/4" Washers to attach the upper tabs on the front bumper to the factory mounting location.

3. Use the (2) M8x55 Bolts, (4) 1/4" Washers and (2) M8 Nylocks through the lower portion of the frame, then through the lower mounting tabs on the front bumper.

4. Check alignment, center and tighten.(See Figure #1)

HD Front Bumper, Polaris® Scrambler XP 850 Instructions - Figure 1

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.