- OR -

Exhaust Systems Polaris® RZR® S 1000

HMF Racing HD Deluxe Front Bumper, Polaris RZR® S 1000 Instructions

For Models: RZR® S 1000 (2016-2021)

Removal

1. Remove the front grill.

Installation

1. Using the (3) supplied M8 Hex Bolts, (6) Washers, and (3) Nylock Nuts, install the Lower Plate of the Front Bumper.

2. Use (2) supplied M12 Flanged Bolts and Nylock Nuts to bolt bumper tubes to frame.  You will need a socket with a long extension.(See Figure #1)

HD Deluxe Front Bumper, Polaris RZR® S 1000 Instructions - Figure 1
(image is shown on Polaris® General™)

3. Install 1-1/4" Cap Plugs into the tubes located at the middle bracket.

4. Install the supplied (2) 1-½” bar clamps using the supplied (8) M8x25 Hex (16) ¼” washers (8) M8 Nylocks(See Figure #2)

HD Deluxe Front Bumper, Polaris RZR® S 1000 Instructions - Figure 2

5. Using the supplied hardware, attach the Mounting Arms to the Clamps, then to the Front Bumper Tabs.  

6. Inspect all areas around the Bumper for proper clearance and alignment and adjust as necessary.(See Figure #3)

HD Deluxe Front Bumper, Polaris RZR® S 1000 Instructions - Figure 3

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.