Polaris Ranger 1000 Exhaust Systems

Exhaust Description

The Polaris Ranger 1000 is available as a Slip-On System in the Titan exhaust. The Slip-On System picks up 1-3 more horsepower throughout the power curve with an equivalent amount of torque.  The Titan-QS (Quiet system) is roughly 5-7 decibels above the stock muffler, while the Titan-XL (Loud system) is 9-11dB.  Additionally, the stainless shell weighs nearly 8lb less than the stock exhaust and offers incredible durability.

Weights:

• Stock Muffler: 22lb
• Titan Slip-On: 10lb

Exhaust Fits:
(20-25) Polaris Ranger® 1000 / Northstar Edition
(20-24) Polaris Ranger® 1000 - High Lifter model

Fuel tuning is not typically required learn more

Typically, fuel tuning is not required when installing an HMF Exhaust on this machine. However, other modifications to the machine may require the need for fuel tuning to ensure the machine runs properly, and there is no damage to the exhaust system. See the tuning settings below for possible tuning solutions or Contact Us for more information.

Typically, fuel tuning is not required when installing an HMF Exhaust on this machine. However, other modifications to the machine may require the need for fuel tuning to ensure the machine runs properly, and there is no damage to the exhaust system. See the tuning settings below for possible tuning solutions or Contact Us for more information.

Resources

• Polaris Ranger 1000 Titan Installation Instructions