- OR -

Exhaust Systems Polaris® Outlaw 450/525: SRA

Print Instructions

HMF Racing Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount

For Models: Outlaw 450/525: SRA (2008-2010)

Removal

1. Remove the Stock Silencer and Gasket from the Head Pipe.

2. Remove the Starter Relay located on the back of the Battery Box. (See Figure #1)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 1

3. The new mounting location is shown in the image.(See Figure #2)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 2

Installation

CENTER MOUNT REMOVAL

1. Use the supplied Bracket and hardware to mount the Starter Relay in its new location.  (See Figure #3)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 3

2. Zip tie any wires that have extra slack.(See Figure #4)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 4

3. Slide the Clamp over the HMF Silencer Inlet.  Then, slide it onto the Stock Head Pipe.

4. Mount the Silencer behind the Rubber Mounts on the Subframe.  Use the Large Fender Washer on the other side of the Rubber Mount. (See Figure #5)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 5

5. Align and center the Silencer and tighten.(See Figure #6)

Polaris / Outlaw 450 & 525 SRA / Slip-On / Center Mount - Figure 6

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.