- OR -

Exhaust Systems Kawasaki® Prairie 700

Print Instructions

HMF Racing Full System Exhaust Instructions

For Models: Prairie 650 (2002-2003), Prairie 700 (2004-2006)

Removal

1. Loosen the Stock Clamp that holds the Silencer and Head Pipe together.

2. Once the Clamp has been loosened, loosen and remove the bolts where the Exhaust Pipe meets the Rear Head.

3. Loosen the Silencer Mounting Bolts.

4. Brace the back of the Silencer with one hand, and take the bolts the rest of the way out.

5. Pull back and twist until the Silencer is removed.

6. Remove the Front Head Pipe.

Installation

Full System Exhaust Instructions - Figure 1

1. Ensure the Stock Cylinder-to-Head Pipe Gaskets have been removed with Stock Exhaust and not stuck on the Exhaust Port.  These gaskets will not be re-used with the HMF Exhaust System.  

2. Install the supplied HMF Gaskets onto the HMF Head Pipe Flanges, then install the Head Pipes using the Stock Nuts. DO NOT TIGHTEN

3. Slide the T-Bolt Clamps onto the end of Silencer.

4. Mount the Silencer in the stock location using the Stock Hardware. DO NOT TIGHTEN

Tighten in this order:

1. Front Cylinder-to-Head Pipe nuts.

2. Rear Cylinder-to-Head Pipe nuts.

3. Exhaust-to-frame nuts.

4. Both T-Bolt Clamps.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.