- OR -

Exhaust Systems Kawasaki® KFX 700

Print Instructions

HMF Racing Dual Full System Exhaust Instructions

For Models: KFX 700 (2004-2010)

Removal

1. Loosen the stock clamp that holds the silencer and head pipe together.

2. Once the clamp has been loosened, loosen and remove the bolts where the exhaust pipe meets the rear head.

3. Loosen the silencer mounting bolts.

4. Brace the back of the silencer with one hand, and take the bolts the rest of the way out.

5. Pull back and twist until the silencer is removed.

6. You must remove the stock toolbox on the right side of the sub-frame.

Installation

Dual Full System Exhaust Instructions - Figure 1

1. Place the gasket on the rear head pipe and finger-tighten.

2. Place the clamp over the right silencer and slide the silencer over the head pipe.

3. Tighten the silencer to the sub-frame using the supplied hardware.

4. Tighten the rear head bolts and T-Bolt clamp.

5. Install the front head gasket on the front head pipe and bolt in the front head pipe.

6. Slide the T-Bolt clamp over the end of the silencer and bolt the silencer to the sub-frame with the stock bolts.

7. Tighten the T-Bolt clamp.(See Figure #1)

Dual Full System Exhaust Instructions - Figure 2

8. With most applications, re-jetting your carburetor is a necessity.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.