- OR -

Exhaust Systems Honda® Rincon

Print Instructions

HMF Racing HMF Optimizer Instructions

For Models: Rincon (2006-2023)

Installation

1. Remove seat

2. Remove the Fuel Injector Cover.

3. Drill a hole in the Left Side Storage Compartment large enough to fit the Optimizer connectors through.  Feed the Optimizer Wiring Harness through the hole.  (See Figure #1)

HMF Optimizer Instructions - Figure 1

4. Be sure to route the Optimizer Harness away from any hot or moving parts.

5. Unplug the grey connector from the  Fuel Injector.  (See Figure #2)

HMF Optimizer Instructions - Figure 2

6. Plug the Grey Optimizer Connector into the Fuel Injector.  Plug the black Optimizer connector into the Gray Injector Harness Connector.  

7. Run the Black Ground Wire to a good chassis ground or the negative battery post.

8. With the Optimizer Harness connected and the ground wire hooked to a solid ground source, secure the wiring harness using the supplied zip ties.

9. Use the supplied Velcro material to mount the Optimizer to the inside wall of the storage compartment.  Be sure to seal the hole around the wiring harness.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.