- OR -

Exhaust Systems Honda® Pioneer 700

Print Instructions

HMF Racing Rear Bumper, Honda® Pioneer 700 Instructions

For Models: Pioneer 700 (2014-2021)

Installation

!!! WARNING !!! Before working on your machine, make sure it is parked on a level surface with the transmission in park and/or the parking brake engaged.

1. Lower the tailgate and remove the (2) allen bolts on both sides of the cargo bed sides.  Save the hardware as it will be reinstalled later.(See Figure #1)

Rear Bumper, Honda® Pioneer 700 Instructions - Figure 1

2. While pulling out on the cargo bed sides to gain access, remove the tailgate pivot pin retaining bolt.  

3. Working on one side at a time remove the pivot pin while raising the rear bumper to match with the pivot pin holes.  Having another person assist can make this step much easier.

4. Reinstall the tailgate pivot pin for each side to hold the bumper in place.(See Figure #2)

Rear Bumper, Honda® Pioneer 700 Instructions - Figure 2

5. Line up the bumper with the pivot pin and cargo bed frame then install the provided M6-1.0x16 Flanged Bolt for each side.(See Figure #3)

Rear Bumper, Honda® Pioneer 700 Instructions - Figure 3

6. Reinstall the allen bolts for the cargo bed side.(See Figure #4)

Rear Bumper, Honda® Pioneer 700 Instructions - Figure 4

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.