For Models: Maverick XDS Turbo (2016-2017)
1. Slide the Apex Windshield Bar into position on the Cage. (See Figure #1)
2. If installing the Low Bar Only, proceed to Step 3. Starting with the Top Cage Clamp (Figure 2), install (4) M6x20 Bolts. Do Not Tighten.(See Figure #2)
3. Install (8) M6x20 Bolts. Adjust and align the (2) Side Cage Clamps and tighten all bolts to a snug fit in a criss cross pattern.(See Figure #3)
4. Confirm alignment and tighten all the bolts on the Cage Clamps.
Hook me up! Get $75 off your next exhaust order.
Sign up for the HMF Community and receive the following perks: