For Models: Maverick Sport 1000R (2019-2021)
1. Install the bumper on the vehicle by sliding it into place through the stock cutouts in rear plastics.
2. Use the supplied (4) M8x25 Allen head bolts, (8) ¼" washers and (4) Nylocs to bolt the two upper brackets of the bumper to the holes in the frame of the vehicle. DO NOT TIGHTEN.(See Figure #1)
3. Install the (2) M8x25 Hex Bolts, (4) ¼" washers and (2) nylocs to the lower portion of the vehicle's frame.(See Figure #2)
4. Center and level the bumper then tighten the upper four bolts then the lower two.(See Figure #3)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: