- OR -

Store Equipment Yamaha YXZ 1000R Rear Cargo Rack, UTV Carrier, Yamaha® YXZ 1000R (19-21)

Print Instructions

HMF Racing Rear Cargo Rack, UTV Carrier, Yamaha® YXZ 1000R (19-21) Instructions

Removal

1. Remove the (2) bolts from the rear of the cargo bed as pictured.(See Figure #1)

Rear Cargo Rack, UTV Carrier, Yamaha® YXZ 1000R (19-21) Instructions - Figure 1

Installation

1. Place the HMF iQ Cargo Rack on the rear of the vehicle.  Line up the mounting locations for the lower bed and install the provided (2) M6x1.0x30 Hex Bolts, (2) #10 Washers, and (2) 1/4" Spacers as pictured.  The Spacer will go below the cargo rack in the recess of the cargo bed.  

TIP: If you are having difficulty getting these bolts started remove the cargo rack and make sure the bed is aligned with the threaded hole.  The cargo bed may have shifted after removing the stock hardware.  Use a small punch or screwdriver to line up all the holes.  (See Figure #2)

Rear Cargo Rack, UTV Carrier, Yamaha® YXZ 1000R (19-21) Instructions - Figure 2

2. Secure the outer arms of the cargo rack to the extensions on the cage using the provided (2) M8x1.25x45 Allen Head Bolts, (2) 5/16" Fender Washers, and (2) M8x1.25 Nylock Nuts.  (See Figure #3)

Rear Cargo Rack, UTV Carrier, Yamaha® YXZ 1000R (19-21) Instructions - Figure 3

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.