1. Remove the 4 Cage Bolts from Cage.
2. Slide the Apex Windshield Bar into position on the Cage. (See Figure #1)
3. Install the (4) M10x55 Flanged Bolts and (4) M10-1.5 Nylock Nuts through the Apex Bar, into the Cage Clamps. Do not tighten.
4. Check for proper alignment and clearance of all parts.
5. Securely tighten the M10x55 Flange Bolts.(See Figure #2)
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: