1. Remove the 4 Cage Bolts from Cage.
2. Note: You may need to loosen the front portion of the Factory Roof to install the Apex Windshield Bar.
3. Slide the Apex Windshield Bar into position on the Cage. (See Figure #1)
4. Install the (4) M10-1.5x55 Flanged Bolts and (4) M10-1.5 Nylock Nuts through the Apex Bar, into the Cage Clamps. Do not tighten.(See Figure #2)
5. Install Cage Clamps using the M6x20 Bolts, tighten in criss cross pattern
6. Finally, securely tighten the M10-1.5x55 Flange Bolts.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: