- OR -

Store Equipment Yamaha YFZ 450 Grab Bar, Yamaha® YFZ 450

Print Instructions

HMF Racing Grab Bar, Yamaha® YFZ 450 Instructions

Installation

1. Remove the stock grab bar by loosening the mounting hardware and plastic mounting hardware.

2. Remove the stock rubber grommets and spacers and install them on the HMF Grab Bar.(See Figure #1)

Grab Bar, Yamaha® YFZ 450 Instructions - Figure 1

2. Using the supplied (4) m8 x 25 Hex Flange Head Bolts, install through the supplied Plastic Mounting Brackets, through the Grab Bar, and tighten into sub-frame.

3. Install the plastics back on the machine.  Check the alignment of the Grab Bar and tighten all hardware.

Discussion