- OR -

Store Equipment Yamaha Raptor 250 Head Light Blocks, Yamaha® Raptor 250

Print Instructions

HMF Racing Head Light Blocks, Yamaha® Raptor 250 Instructions

Installation

1. Unplug and Remove the Stock Headlights.

2. Remove the 2 Stock Grommets and save them.  You will reuse these in the large holes of the Block off Plates.

3. Position the Block off Plates in line with the Stock Mounting Holes and slide over the Stock Tabs.

4. Tighten the Button Head Allen Screw.(See Figure #1)

Head Light Blocks, Yamaha® Raptor 250 Instructions - Figure 1

Discussion