HD Front Bumper, Polaris RZR XP® Turbo (16) Instructions 
1. Using the supplied (5) M8-1.25 x 20 Hex Bolts, (10) 3/8" Flat Washers, and (5) m8-1.25 Nylock Nuts, install the Front Bumper.
2. Carefully center the bumper, then tighten the mounting hardware.
3. Use the supplied (4) M6-1.0 x 20 Button Head Bolts with (4) #10 Flat Washers to install the Skid Plate.
4. The (4) Nut - Speed/Clip - M6-1.0 are preinstalled on the skid plate mounting tabs.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks:
