- OR -

Store Equipment Polaris RZR XP 4 Turbo U4 Front Bumper, Polaris RZR XP® 4 Turbo (16)

Print Instructions

HMF Racing U4 Front Bumper, Polaris RZR XP® 4 Turbo (16) Instructions

Installation

1. Remove the stock grill fascia and the stock winch cover.

2. Install the supplied (2)1 ½” bar clamps using the supplied (8)m8x25 hex (16) ¼” washers (8)my nylocks(See Figure #1)

U4 Front Bumper, Polaris RZR XP® 4 Turbo (16) Instructions - Figure 1

3. Using the (5) supplied m8 hex bolts, (10)1/4” washers, and (5) nylocks, install the front bumper.

4. Tighten all of the bolts and install the stock grill fascia.

5. Inspect all of the areas around the bumper for proper clearance and alignment, and adjust as necessary.

Discussion