LT Front Bumper, Polaris RZR XP^® 4 Turbo (16-18) Instructions

Removal

1. Remove the Winch Cover from the Front Fascia. 

Installation

1. Using the (5) supplied M8 hex bolts, (10) washers, and (5) nyloc nuts, install the IQ Defender Front Bumper.  (See Figure #1)

2. Carefully center the bumper, then tighten the mounting hardware.(See Figure #2)

3. Use the (4) supplied M6 button head bolts with (4) washers to install the skid plate.(See Figure #3)

4. Speed nuts are preinstalled on the skid plate mounting tabs.