- OR -

Store Equipment Polaris RZR RS1 LT Front Bumper, Polaris RZR® RS1

Print Instructions

HMF Racing LT Front Bumper, Polaris RZR® RS1 Instructions

Removal

1. Remove the Stock Tow Hook by loosening the (2) Stock Bolts.(See Figure #1)

LT Front Bumper, Polaris RZR® RS1 Instructions - Figure 1

Installation

1. Using the (2) supplied M8 x 1.25 x 20 Hex Bolts, (4) 1/4" Flat Washers, and (2) M8 x 1.25 Nyloc Nuts, install the Lower Plate of the Defender Front Bumper.

2. Use (2) supplied M12 x 1.75 x 25 Flanged Bolts and M12 x 1.75 Nyloc Nuts to bolt bumper tubes to frame.  You will need a socket with a long extension.(See Figure #2)

LT Front Bumper, Polaris RZR® RS1 Instructions - Figure 2

3. Install 1-1/4" Cap Plugs into the tubes located at the middle bracket.

4. Inspect all areas around the Bumper for proper clearance and alignment and adjust as necessary.

5. Install the Stock Tow Hook back in the stock location using the (2) Stock Bolts.(See Figure #3)

LT Front Bumper, Polaris RZR® RS1 Instructions - Figure 3


Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.