1. Remove the stock (4) allen bolts and (4) nylocks from the cage mounts. Be sure to keep the bolts and nylocks, they will be used on the install.(See Figure #1)
2. Install the upper bumper support bars using the stock (4) allens and (4) nylocks.
3. Install the IQ Front Bumper with the supplied (2) m8x20 hex, (4)1/4” washers, and (2) m8 nylocks to the upper bumper supports and the bumper tabs. DO NOT TIGHTEN. (See Figure #2)
4. Install the supplied (2) m8x25 hex, (4) ¼” washers and (2) m8 nylocks to the lower bumper bracket. (See Figure #3)
5. Tighten all of the bolts and inspect all of the areas around the bumper for proper clearance and alignment, and adjust as necessary.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: