- OR -

Store Equipment Can-Am Renegade XC Front Bumper, Can-Am® Renegade (12-23)

Print Instructions

HMF Racing XC Front Bumper, Can-Am® Renegade (12-23) Instructions

Installation

1. Remove the original front bumper.

2. Remove the front skid plate bolts and large washers.

3. Position the HMF front bumper on the vehicle (Lower bumper mount goes between frame and skid plate) and install the supplied bolts, washers, and nyloc nuts at the top bumper mounts.  DO NOT TIGHTEN.(See Figure #1)

XC Front Bumper, Can-Am® Renegade (12-23) Instructions - Figure 1

Renegade (12-22) Models
Older models will mount the front grill and fairing bracket using to the spacer welded to top plate of bumper.  (See Figure #2)

XC Front Bumper, Can-Am® Renegade (12-23) Instructions - Figure 2

Renegade (23->) Models
Newer models will use the supplied spacers, buttonhead bolts, washers, and nuts to bolt through the holes located on the top mounting plate of bumper. (See Figure #3)

XC Front Bumper, Can-Am® Renegade (12-23) Instructions - Figure 3

NOTE: Top Bumper Mount will attach to the frame with the supplied hardware.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.