- OR -

Store Equipment Can-Am Maverick X3 Gusset Kit - Can-Am® Maverick X3

Print Instructions

HMF Racing Gusset Kit - Can-Am® Maverick X3 Instructions

Removal

1. Place the vehicle in park.  Raise the front end far enough off the ground to remove the front tires and place jack stands under the vehicle.

2. Remove the front tires, unbolt all 4 control arms and slide them forward, off of the mounting bolts.

3. Remove the 2 small 6MM bolts from the bottom of the front plate near the front lower control arm mounting bolts.  You will not re-use these.

Installation

1. Install one “U” shaped gusset over the lower rear control arm bolts.

2. Install one straight “dog bone” gusset over the top rear control arm bolts.

3. Next, install the large plate over the top and bottom bolts of the control arms, with the 2 supplied 6MM bolts and washers at the bottom of the front plate near the lower control arm mounting bolts.

Gusset Kit - Can-Am® Maverick X3 Instructions - Figure 1

4. Install all 4 control arms but do not install nuts yet.

5. Install one “U” shaped gusset over the lower rear control arm bolts.

Gusset Kit - Can-Am® Maverick X3 Instructions - Figure 2

6. Install one straight “dog bone” gusset over the top rear control arm bolts.

Gusset Kit - Can-Am® Maverick X3 Instructions - Figure 3

7. Finally, reinstall the:

  • Front bumper
  • All 8 control arm nuts and torque to OEM specs.
  • Front tires


NOTE:  It will be necessary to check and possibly adjust front toe settings.

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.