- OR -

Store Equipment Can-Am Maverick Sport HD Front Bumper, Can-Am® Maverick Sport

Print Instructions

HMF Racing HD Front Bumper, Can-Am® Maverick Sport Instructions

Installation

Drilling into the stock front bumper is required.  Masking tape, center punch, a 1/8 drill bit, and a 3/8 drill bit will be needed.

1. Start by taping off the front bumper uprights where the new bumper will sit.

2. Hold the new bumper in place making sure its level and marking the hole centers with a marker or pencil.

3. Using the center punch make a dimple on the hole center marks.

4. Use the 1/8" drill bit to make a pilot hole going through both sides of the tube the follow with the 3/8 drill bit.

5. Put bumper in place and the install hardware (2) M8x 55 Allen heads, (4) 1/4" washers and (2) M8 nylocks).(See Figure #1)

HD Front Bumper, Can-Am® Maverick Sport Instructions - Figure 1

6. Level and tighten.(See Figure #2)

HD Front Bumper, Can-Am® Maverick Sport Instructions - Figure 2

Updated 3/15/19

Discussion

Hook me up! Get 10% off your next exhaust or equipment order.

Sign up for the HMF Community and receive the following perks:

  • 10% off your next exhaust or equipment purchase
  • Details about upcoming HMF products
  • Exclusive product giveaways

Tell us your vehicle for 10% off!

Sign Me Up!

No, thanks. I'll pay full price for my powersports needs.