NOTES:
-It is recommended to use medium strength thread locking agent (typically blue) on all bolts.
-This bumper may be installed with out without the rear plastic fascia and heatshield installed. Removal or installation of the fascia & heatshield will require the removal of the IQ HD Rear Bumper.
Installation
1. Using (2) of the provided M10 bolts install the top two mounting bolts to the frame mounts located under the rear fascia, do not tighten these bolts yet. Having another person help hold the bumper while threading in the bolts will make this step easier.
2. Install the remaining (2) M10 bolts in lower bumper mounting points, do not tighten these bolts yet.
3. Check for clearance and alignment of the bumper, then tighten all bolts. (See Figure #1)