Monday, May 3rd, 2010

Exhaust Repack Instructions: Steps 9-14


Step 9: Using a small screwdriver or pry bar, push the excess packing down below the end of the core.



Step 10: Slide the core into the exhaust shell



Step 11: Using a small screwdriver or pry bar, tuck the packing in the exhaust shell.



Step 12: Push the inlet completely into the exhaust shell, lining up the rivet holes and your marker mark.



Step 13: You may need to pry the core sideways to catch the end cap lip.



Step 14: Using an air rivet gun or automotive style riveter (small hand riveter will not work), secure all rivets on the inlet.

Move on to step 15 >>

Comments

(+) Add a comment

There are no comments for this resource.

« Back to Tech Resource listings