Monday, May 3rd, 2010

Exhaust Repack Instructions: Steps 1-4

Repacking your exhaust requires an air rivet gun or an automotive style riveter. A small hand riveter will not work for this.


If you would like us to repack your exhaust system, see our Repair Services for details.

Click here to download these instructions in PDF format. (1MB)

Click here to view the video

Repacking Instructions



Step 1: Using a marker, draw a line representing the clock position of the inlet and exhaust.



Step 2: On the inlet side only, tap all the rivets until the stem drops.



Step 3: On the inlet side only, drill out each rivet.



Step 4: Using a rubber mallet, tap the exhaust shell to remove the inlet.

Move on to step 5 >>

Comments

(+) Add a comment

There are no comments for this resource.

« Back to Tech Resource listings