optimizer settings in Alberta

[tvdave]

I have a 2009 Can Am Renegade X 800 with an HMF slip on & a "Twin Air" air filter. My elevation here is approx 3500-4000 feet. I would like to know what the baseline settings are for the optimizer at this altitude. I have been running just a slip-on & air filter for the last year or so. Will the optimizer make a big difference in my machine & do I have to spend lots of time tuning it?
I ride in temps from -20c to +30c.

[Mike/HMF]

There are not different base settings for different elevations etc. Because there are machines with infinite parts combos, temps, elevation etc. Start with the base settings that are pre-programmed. (these should be close) You can fine tune from there if you need to. The Optimizer will definitly increase power by correcting your lean air fuel ratio.