HMF Slip-on for my wolverine

[wolverine350rider]

Well, i finally did it! the HMF will be here Monday.

Now, i WOULD of posted this in the jetting section if it werent filled with a bunch of Porn site links........

But, what do you reccomend for my jetting? I got that basic jet kit from you guys. I also bought a Dyno Jet kit with it just to be safe

I run 0-1000 ft. No Airbox lid, high flow filter, and of course, you HMF Slip-on.

I cannot wait to hear the new pipe revving up on my wolvie.

Also, i got the queit core too, can you tell me the sound DB levels with, and without the quiet core?

Thanks!
John

[motoz/HMF]

Well, i finally did it! the HMF will be here Monday.

Now, i WOULD of posted this in the jetting section if it werent filled with a bunch of Porn site links........

But, what do you reccomend for my jetting? I got that basic jet kit from you guys. I also bought a Dyno Jet kit with it just to be safe

I run 0-1000 ft. No Airbox lid, high flow filter, and of course, you HMF Slip-on.

I cannot wait to hear the new pipe revving up on my wolvie.

Also, i got the queit core too, can you tell me the sound DB levels with, and without the quiet core?

Thanks!
John

2006 = 140 2005 = 145 any older go up 10 sizes from stock. Set the fuel screw to 2.0~2.5 turns out.
Db approx 102~104 open and approx 96~98 with the qci.

[wolverine350rider]

Thanks a bunch! Do you have a pictures of a Black HMF mounted on a quad?
I will take some pictures once I get it mounted!