Jetting my Rancher

[Twerp]

Hi my question is I have a 2003 honda rancher stock motor, I just put a HMF pipe on and i'm concerned about jetting. I don't want to but the expensive Dynojet kit or the K/N power kit just yet, I want to change the stock jets. What jet numbers should I use? By the way the HMF pipe makes a world of difference, I have heads turning in my direction every time I fire it up. Good job HMF. :cool:

[hmfadmin]

Try a 142 main jet and then refer to our jetting section here and take the Motoz advice on adustments.

Joe/HMF

[Twerp]

Thanks for the jet size should I also adjust the fuel/air screw, 2.5 turns out?

[KEVIN/HMF]

2.5 to 3 turns out. This is for off-throttle popping.