For Models: Raptor 250 (2008-2013)
1. Loosen the Stock Clamp that holds the Stock Silencer and Head Pipe together.
2. Loosen the Silencer Mounting Bolts.
3. Brace the back of the Silencer with one hand and take the bolts the rest of the way out.
4. Pull back and twist until the Silencer is removed.
5. You must remove the Stock Gasket off of the Header. You will no longer need it.
1. Slide the T-Bolt Clamp over the HMF Silencer, then slide it onto the Head Pipe.
2. Mount the Silencer with the Stock Bolts or supplied hardware, and tighten.
3. Tighten the T-Bolt Clamp to secure the Silencer to the Head Pipe.
4. With most applications, re-jetting your Carburetor is a necessity.(See Figure #1)
Note: For the Silencer Mounting Bracket, use the Front Grab Bar Mounting Bolt Hole instead of the Original Silencer Mounting Bolt Hole.
Hook me up! Get 10% off your next exhaust or equipment order.
Sign up for the HMF Community and receive the following perks: